Hot Rod Sled Shop Inc H5 Dual Rate Front Spring Kit for Summit 2009-2023 with 36-42" front end.

HOT ROD SED SHOP INC H5 DUAL RATE FRONT SPRING KIT for Ski-doo SUMMIT models 2009 -2023 with 36", 38" OR 40" ski stance and 2" diameter front shocks AND A FACTORY SPRING LENGTH OF 250MM-280MM OR 10- 11" and the shock has factory screw type adjustment collars these will work perfectly (see additional note at bottom). This is a more aggressive, stiffer than stock, front dual rate spring kit that works really well with stock shock valving and is a quick install. One of our goals was for the consumer to just install these on stock shocks without the big cost of revalving and get a much better handling sled. Most of your stock SUMMIT front springs are somewhere in the 80-90 lb. rate (when new) which is mushy, too soft, causes severe body roll, and bottoms the front all the time on decent drops. Stop the body roll and mushy, soft, and quick bottoming front end on your sled with these top quality dual rate spring kits. Our front suspension spring kits are dual rate and have a stiffer rate than stock initial rate for less body roll while still compressing for sidehilliing and yet offering a firmer more planted feel in the stutters as well as jamming over the big g-outs, moguls, and drops. The dual rate of our springs controls the really big hits with less bottoming and better control of front end compression. This kit still offers a smooth plush ride but has a stiffer rate as they are compressed more keeping the body roll and bottoming at a minimum while offering a smooth ride. These are top quality USA made kits powder coated black and have billet aluminum spring adapters and delrin separator! Note: some sumit models hav a shick body with a step or overlap in the shock body- the delrin spacer made need to be clearanced for the step using a dremel or porting tool with sanding wheel to clear the step.