We are putting the power to the ground on the Summit X project with our Hot Rod Sled Shop Inc. clutch kit. This kit with pinweight and clicker changes can run here at sea-level and to 10,000 feet elevation, no spring or ramp changing. The kit has our primary spring, custom HRSS ramps, helix, secondary spring and a Dalton pin kit and we put a set of Quick Clickers I the primary to make clicker adjustments easy. We installed a Team Hollow jackshaft and a custom machined QRS secondary from a 4 stroke with a floating kit and FBP rollers. We plan on testing some TEAM Tied and TSS-04 setups on this sled and this lets us change secondary clutches easily. We also installed a Ski-doo QRS Tech link brace to help keep the clutch alignment in place.